If you aren't so much into the mechanics of cars yet want them to work in tip-top condition, then you will want to know about front wheel bearings and how to replace them. A front wheel bearing is a wheel assembly that connects to the drive axle components of your vehicle. They provide proper operation of a vehicle by reducing the friction of the tires and their hubs. They make a car run much more smoothly.

Therefore, it is important to stay on top of their maintenance and replace them should they become worn down. To know if it needs replacing, watch out for sounds, broken seals, and a shifting car when in motion.

Should you need to replace your front wheel bearing, here is everything you need to know.

RELATED: Everything You Need To Know About Servicing Your Electric Car

What Is A Front Wheel Bearing Replacement?

A front wheel bearing replacement is simply replacing the front wheel bearing of a vehicle so that it can run much smoother and safer. The front wheel bearing works to help wheels spin faster with as little friction as possible.

A broken or damaged front wheel bearing is very difficult to diagnose as it will be hard to hear when the car is turned on and in motion. With the front wheel bearings withstanding a lot of abuse over the years, it will come a time when they need replacing. If in doubt, hire a professional.

RELATED: Here's Everything You Should Know About The Electric Crate Motor

How To Change A Front Wheel Bearing Replacement

The front wheel bearing of your vehicle shouldn't need replacing too often. They should last a good few years before they start to make noises or the seal becomes loose. When it does come to needing to replace the front wheel bearing, it will take around one hour to fix. To perform a front wheel bearing replacement, follow these steps:

1. Park your vehicle on a flat surface

2. Tighten the bearings that you aren't replacing

3. Unscrew and loosen the bearings you are replacing and continue until they are removed

4. Remove the brake caliper, dust cover, cotter pin, castle nut, rotor, and hub bolts

5. Disassemble the hub, remove races, and clean the knuckle area

6. Fit new races and fresh wheel bearings

7. Finish by replacing all removed parts in reversed order

Although following these steps might be easy for some, it is often a good idea to seek help from an expert so that it is replaced smoothly and safely. Replacing them incorrectly could result in hindering the smoothness of your car or not lasting very long. Most steps are simple yet the removal of the parts may need expert help, as will replacing them. Again, if in doubt, contact a professional.

In summary, check up on your front wheel bearings from time to time to check their condition. Should you hear strange noises or notice your car shifting from side to side, then it might be a sign that your front wheel bearings need replacing. It is fairly affordable and quick to do so, and it will make your wheels move faster with less friction.